Square cupola

Cupola with octagonal base
Square cupola
TypeJohnson
J3J4J5
Faces4 triangles
5 squares
1 octagon
Edges20
Vertices12
Vertex configuration 8 × ( 3 × 4 × 8 ) + 4 × ( 3 × 4 3 ) {\displaystyle 8\times (3\times 4\times 8)+4\times (3\times 4^{3})}
Symmetry group C 4 v {\displaystyle C_{4v}}
Propertiesconvex
Net

In geometry, the square cupola (sometimes called lesser dome) the cupola with octagonal base. In the case of edges are equal in length, it is the Johnson solid, a convex polyhedron with faces are regular. It can be used to construct many polyhedrons, particularly in other Johnson solids.

Properties

The square cupola has 4 triangles, 5 squares, and 1 octagon as their faces; the octagon is the base, and one of the squares is the top. If the edges are equal in length, the triangles and octagon become regular, and the edge length of the octagon is equal to the edge length of both triangles and squares.[1][2] The dihedral angle between both square and triangle is approximately 144.7 {\displaystyle 144.7^{\circ }} , that between both triangle and octagon is 54.7 {\displaystyle 54.7^{\circ }} , that between both square and octagon is precisely 45 {\displaystyle 45^{\circ }} , and that between two adjacent squares is 135 {\displaystyle 135^{\circ }} .[3] A convex polyhedron in which all the faces are regular is a Johnson solid, and the square cupola is enumerated as J 4 {\displaystyle J_{4}} , the fourth Johnson solid.[2]

Given that the edge length of a {\displaystyle a} , the surface area of a square cupola A {\displaystyle A} can be calculated by adding the area of all faces:[1]

A = ( 7 + 2 2 + 3 ) a 2 11.560 a 2 . {\displaystyle A=\left(7+2{\sqrt {2}}+{\sqrt {3}}\right)a^{2}\approx 11.560a^{2}.}
Its height h {\displaystyle h} , circumradius C {\displaystyle C} , and volume V {\displaystyle V} are:[1][4]
h = 2 2 a 0.707 a , C = ( 1 2 5 + 2 2 ) a 1.399 a , V = ( 1 + 2 2 3 ) a 3 1.943 a 3 . {\displaystyle {\begin{aligned}h&={\frac {\sqrt {2}}{2}}a\approx 0.707a,\\C&=\left({\frac {1}{2}}{\sqrt {5+2{\sqrt {2}}}}\right)a\approx 1.399a,\\V&=\left(1+{\frac {2{\sqrt {2}}}{3}}\right)a^{3}\approx 1.943a^{3}.\end{aligned}}}

3D model of a square cupola

It has an axis of symmetry passing through the center of its both top and base, which is symmetrical by rotating around it at one-, two-, and three-quarters of a full-turn angle. It is also mirror-symmetric relative to any perpendicular plane passing through a bisector of the base. Therefore, it has pyramidal symmetry, the cyclic group C 4 v {\displaystyle C_{4v}} of order 8.[3]

Related polyhedra and honeycombs

The dual of a square cupola

The dual polyhedron of a square cupola is the polyhedron with 8 triangles and 4 kites as its faces.

The square cupola can be found in many constructions of polyhedrons. An example is the rhombicuboctahedron, which can be seen as eight overlapping cupolae. A construction that involves the attachment of its base to another polyhedron is known as augmentation; attaching it to prisms or antiprisms is known as elongation or gyroelongation.[5][6] Some of the other Johnson solids are elongated square cupola J 19 {\displaystyle J_{19}} , gyroelongated square cupola J 23 {\displaystyle J_{23}} , square orthobicupola J 28 {\displaystyle J_{28}} , square gyrobicupola J 29 {\displaystyle J_{29}} , elongated square gyrobicupola J 37 {\displaystyle J_{37}} , and gyroelongated square bicupola J 45 {\displaystyle J_{45}} .[7]

3D model of a crossed square cupola

The crossed square cupola is one of the nonconvex Johnson solid isomorphs, being topologically identical to the convex square cupola. It can be obtained as a slice of the nonconvex great rhombicuboctahedron or quasirhombicuboctahedron, analogously to how the square cupola may be obtained as a slice of the rhombicuboctahedron. As in all cupolae, the base polygon has twice as many edges and vertices as the top; in this case the base polygon is an octagram. It may be seen as a cupola with a retrograde square base, so that the squares and triangles connect across the bases in the opposite way to the square cupola, hence intersecting each other.

The square cupola is a component of several nonuniform space-filling lattices:

References

  1. ^ a b c Berman, Martin (1971). "Regular-faced convex polyhedra". Journal of the Franklin Institute. 291 (5): 329–352. doi:10.1016/0016-0032(71)90071-8. MR 0290245.
  2. ^ a b Uehara, Ryuhei (2020). Introduction to Computational Origami: The World of New Computational Geometry. Springer. p. 62. doi:10.1007/978-981-15-4470-5. ISBN 978-981-15-4470-5. S2CID 220150682.
  3. ^ a b Johnson, Norman W. (1966). "Convex polyhedra with regular faces". Canadian Journal of Mathematics. 18: 169–200. doi:10.4153/cjm-1966-021-8. MR 0185507. S2CID 122006114. Zbl 0132.14603.
  4. ^ Sapiña, R. "Area and volume of the Johnson solid J 4 {\displaystyle J_{4}} ". Problemas y Ecuaciones (in Spanish). ISSN 2659-9899. Retrieved 2020-07-16.
  5. ^ Demey, Lorenz; Smessaert, Hans (2017). "Logical and Geometrical Distance in Polyhedral Aristotelian Diagrams in Knowledge Representation". Symmetry. 9 (10): 204. Bibcode:2017Symm....9..204D. doi:10.3390/sym9100204.
  6. ^ Slobodan, Mišić; Obradović, Marija; Ðukanović, Gordana (2015). "Composite Concave Cupolae as Geometric and Architectural Forms" (PDF). Journal for Geometry and Graphics. 19 (1): 79–91.
  7. ^ Rajwade, A. R. (2001). Convex Polyhedra with Regularity Conditions and Hilbert's Third Problem. Texts and Readings in Mathematics. Hindustan Book Agency. p. 84–89. doi:10.1007/978-93-86279-06-4. ISBN 978-93-86279-06-4.
  8. ^ "J4 honeycomb".

External links

  • v
  • t
  • e
Pyramids, cupolae and rotundaeModified pyramidsModified cupolae and rotundae
Augmented prismsModified Platonic solidsModified Archimedean solidsElementary solids
(See also List of Johnson solids, a sortable table)